Search Results

LS-10-12 and LS-100-12 12V Beam Shutters LS-20-24 AND LS-20SIL-24 24V Beam Shutters LS-200 Beam Shutter Optoblok Optical Table Laser Guarding Acrylic Warning Signs Laser Safety Eyewear

ICS-9 Interlock System Download Brochure Get a Quote The ICS-9 Expandable Laser Interlock System is NRTL Certified and can achieve performance level ‘e’ (EN ISO 13849-1 PLe), It is derived from the ICS-6 which is the most popular Laser Interlock Control System. ​ This compact, versatile unit can control laser interlocks, door locks, illuminated warning signs and other equipment. It can operate beam shutters and the laser power with feedback monitoring and fault detection. It can be interfaced to Access Control and Fire Detection Systems and may be fitted with an Override to allow controlled access through interlocked doors while also accepting emergency stop inputs. ​ The ICS-9 is NRTL provides high levels of safety and functionality and has full start-to-end dual channel architecture and fault detection to meet the latest standards. The ICS-9 is NRTL certified and complies with the relevant European Machinery Directive Standards and can be connected to achieve EN ISO 13849-1 PLe (Performance Level ‘e’ - Safety related control systems). For a quick quote, you may fill out our interlock design form which can be downloaded using the button below. Download Interlock Design Form The ICS-9 functions include: ​ Simple, easy-to-use control panel which can be wired directly to 4 interlocks or groups of interlocks Several Expansion Cards (which are automatically tested) may be fitted to enable the following options: Remote Communications (Ethernet/USB Connectivity) Integrated Active Laser Guarding Safety Logic Plus integration The provision of an uncommitted relay board for future options Full start-to-end dual channel architecture – for even higher reliability Full start-to-end fault detection – simplifying analysis Interlocked AC Power – for added safety Interlocked low voltage supply for beam shutters – for faster integration Laser interlock connector operators – for all lasers Key-switch operation – to prevent unauthorized use Arm laser button – just press to arm Time limited fail-safe override option – for authorized personnel Automatic switching of illuminated signs – indicating danger or safe modes Emergency stop circuit – to prevent injury or damage in an emergency Further functions: ​ ICS-9 can be connected to other interlock controllers to operate as a primary or secondary unit Optional safety status and ready status outputs can be provided to communicate with other interlock controllers or a remote indicator panel The ICS-9 has a standard deep box for expansion cards or safety contactors to switch high power or multiple lasers External facility to allow the system to be disabled by an external source e.g. supervisor’s key-switch Operation of AC Power or low voltage signs Integrated automatic switching of single or dual mode signs Connect to virtually unlimited number of door contacts and Emergency Stop Buttons Contact Us Typical Interlock Configuration Remote Communication and Control with ICS Buddy - the portable interlock controller ​ The ICS-9 can communicate directly with the ICS Buddy. The ICS Buddy is a portable Interlock Monitor and Controller that can be used to remotely view and control the status of laser interlock controllers and laser shutters in a lab. ​ It enables portable control so users can just walk around with the tablet from office to other locations. The user can also remotely view and control laser shutters – just using the local Wi-Fi signal to stay in touch. The status of the whole lab can be viewed remotely in Lab View – ideal for numerous Interlocks, shutters and LED Warning Signs. ​ It can also display Safety Logic Plus, the electrical logic gate system that sets up complex labs with a sequence of logical AND/OR gates to permit a laser to be armed safety. To request a quote, click here to download the interlock worksheet and email the completed form to contact@rtlasersafety.com Contact Us

Custom LED and Illuminated Signs Get a Quote RT Technologies offers custom LED and Illuminated signs with your wording and/or symbols to meet your requirements. LED Signs Available for customization LED Mini Low Voltage (24V DC), Low Energy Dimensions: 6.3″ (w) x 4.3″ (h) x 1.5″ (d) LED Ultra Large Area Low Voltage (24V DC), Low Energy Dimensions: 18.5″ (w) x 7″ (h) x 1″ (d) Also available in a larger (790mm – 31″) size: 31.1″ (w) x 7″ (h) x 1″ (d) Weatherproof IP66 rated Ultra LED Low Voltage (24V DC), Low Energy It is IP66 rated to BS60529 which means that the sign is protected against powerful water jets and is dust-tight – ideal for use in the wind and rain. Dimensions: 22.8″ (w) x 7″ (h) x 1″ (d) LED Slim Jim Contractor friendly, runs directly from 110V AC mains power (wire directly to a light switch) Dimensions: 14″ (w) x 4″ (h) x 0.4″ (d) Illuminated Signs Single, Double and Triple Aspect signs are available. Runs on 230V. 110 VAC versions are available. “RT Technologies provided us customized signage for our equipment and we are very pleased with the quality.” ​ – Bobby Seal, Emerson Automation Solution Custom LED sign Ultra 470 – WARNING High Pressure Please contact us with any questions or if you require a quote. We look forward to working with you! Contact Us

Radiation Decontamination Solutions The Quick Decon Transition Metals (TM), Actinides (A), and Halogens (H) solutions are the world’s most effective and safest solutions for radiation decontamination of radioactive surfaces including human skin . ​ These solutions were developed by a combination of nuclear pharmacists, nuclear chemists, radiation experts, and NASA consultants with many years of experience in the nuclear and medical device industry. They have succeeded in the goal to develop a formula that would safely and significantly remove radioactive material from human skin and on other surfaces in the event of a nuclear event. ​ Radioactive contamination poses several cleanup problems including the following: the safety of cleanup personnel, control of waste volume, and end-state contamination level. In an effort to address these problems, we have investigated the use of ion-exchange resin preparation technology to treat contaminated surfaces. ​ These products reduce cleanup time; control waste volume and leave the surface in a state where minimal radioactive contamination is present. Get a Quote Products Quick Decon Solutions The Quick Decon Solution (QDS) family of products can significantly reduce time and personal dose associated with ALL decontamination efforts and tasks ​ The core technology is called the "Mass Effect" influence. When our proprietary solutions are introduced to a contaminated surface, the radioac tive material is lifted from the surface and suspended in the solution, where it can be easily wiped up or rinsed away as radioactive waste. Spray on, let solution penetra te for 1-5 m ins, and th en wipe down or rinse off. Our products are currently in use in commercial waste facilities and in hospitals, with a proven track record of significantly reducing time and dose on critical path applications such as Cavity Decon. ​ The QDS TM GEL is extremely desirable to use for Nuclear Power Plant (NPP) RX Cavity cleaning and use in general at NPP’s because of its unique ability to remove the radioactive contaminants from solution WITHOUT binding or affecting the resin binding sites. The Decon GEL has NO Ionics (available free radicals) and contains no detergents and thus is ‘inert’ to the resin materials. Therefore, the active ‘sites’ for the Rad Waste resins are left uncompromised/unused and available to filter out the targeted contaminants from the RCS, etc. For the above reasons, and because the Quick Decon solution is 98% H2O, it passes straight through the resins with no negative effects. ​ Download Brochure Request a Sample Each solution is ion-specific and specially prepared to address a specific chemical group. The Transition Metals (TM) solution will pick up Cesium, Cobalt, Strontium, Chromium, Manganese, Iron, Zinc & Nickel. The Actinide (A) solution will pick up Plutonium, Uranium, Titanium, Technetium, Americium, Radium, etc. The Halogen (H) solution will pick up Iodine, Fluorine, Chlorine, etc Quick Decon Solutions QDS COMBO WIPES The core technology used in the QDS Combo Wipes is based upon the "Mass Effect" Principle. When the proprietary wipes, which are saturated with the decontamination solution, come in direct contact with ‘loose’ or ‘removable’ contamination on a surface, the radioactive material is ‘lifted’ from the material surface via the ion-exchange process. Like-property non-radioactive ions replace the radioactive ones. The radioactive ions/contamination is collected on the wipe and disposed of as radioactive waste. Download Brochure Get a Quote Combo Wipes Nuke Away Decon Spray Bottle Any of the QDS Solutions (Trace Minerals, Actinides, or Halogens) are available for use in the Nuke Away Dual Sprayer The spray bottle dispenses two liquids at the same time at a predetermined, fixed dilution ratio. This makes it ideal for decontaminating surfaces where the radioactive source term is unknown. Benefits Safe & quick ionic-focused solution for radiation removal Cost Effective Safe surface radiation isotope remover First line for safe radiation defense Can be used on intact human skin Environmentally friendly Far superior to Radiacwash or any other similar product Effective on 63 different elements Download Brochure Nuke Away Emergency RadDecon Kits A revolutionary scientific product for radiation decontamination. ​ Now, scientifically formulated products used by nuclear power plants and nuclear waste facilities are available to emergency personnel, first responders and the general public. For the first time, using one easy Emergency RadDecon Kit, you can safely, quickly, and significantly remove radioactive material from yourself and surfaces. Decontaminate yourself, your family, and your important possessions in the event of a radiation emergency. ​ ​ Download Brochure Learn More The Emergency RadDecon Kit is the world's most effective and safest solution for radiation decontamination of radioactive surfaces including human skin. RadDecon Kits Get a Quote Our products are currently in use to remove radioactive material in many nuclear power plants, nuclear waste facilities and in hospitals with nuclear medicine departments throughout the United States and abroad. ​ These products are NOT radioactive before use. The liquid solutions should NOT be used on open wounds and should NOT be ingested. For White Papers and Decontamination Test Results, please visit our download page . Product Matrix. Click on picture below to view Get in Touch!

Laser Safety Consulting Remote Laser Safety Officer (LSO) Training On-Site Laser Safety Training

Laser Safety Products When you're building out your facility to accomodate laser safety regulations and compliance standards, you may have questions about how to best accomplish these tasks. With a variety of products to choose from and arrangements to make for installation, there are many moving pieces that go into planning your facility's laser safety strategy. ​ Whether you’re in the process of building out a new laser safety setup or are rethinking portions of an existing one, RT Technologies has the products and expertise that you need to get your facility in top shape. Questions? Contact us! Laser Safety Products for the Workplace ​ When it comes to outfitting your workplace to comply with relevant laser safety standards, you need to think of the rooms where you’ll operate the lasers, the individuals who will be interacting with the laser machinery teracting with laser machinery, and the responsibility you have to individuals within your facility who unknowlingly come into contact with the laser machinery. ​ You’ll find the full lineup of laser safety equipment available from RT Technologies to be more than sufficient for meeting your laser safety needs. From fully protected laser safety enclosures to safety blinds and curtains and an array of LED warning signs , you can find the right combination of equipment to protect your facility and all who visit it. Laser Safety Products for Personnel ​ Whether your facility requires a full laser safety setup or just a few simple protective measures, your personnel will more than likely require some sort of protection when they interact with laser machinery and equipment on your premises. ​ Laser eyewear is a common safety precaution that you’ll need to consider for employees and guests to your facility. From protective eyewear for the dental facility to goggles specific for protecting against measured laser pulses, you can find a variety of laser safety eyewear among our expansive lineup of laser safety glasses and goggles. ​ For facilities that use higher power lasers, you can select from a lineup of shutters that allow your staff to operate machinery in a safe manner. If you require a custom setup, please reach out to learn more about our laser safety services. Developing a Laser Safety Strategy Resources Featured Product: Barriers FAQ's RT Blog From setup to registration, implementing a laser safety strategy can include considerable coordination between your staff and the regulatory organizations you work with. If you’re looking for some assistance in getting your laser safety strategy off the ground, we can work with you and your staff to understand the requirements that are relevant to your laser safety program. ​ Our laser safety consultation services put you in touch with a professional to determine the best way to implement your laser safety strategy. We can help you work through compliance registration, as well as provide training for your staff as they learn to operate your laser equipment and properly utilize safety products. ​ Moreover, our laser safety experts are up-to-date on laser safety regulations and can provide the direction you need to complete compliance paperwork for your facility’s setup. We also provide turnkey services for certain products, such as laser safety enclosures which ensure your ability to maintain compliance with relevant regulatory standards. Get a Laser Safety Quote Today! To learn more about our laser safety produts and services, contact RT Technologies today to see what it would take to fulfill your laser safety needs! Contact Us First Name Last Name Email Phone Leave us a message... Submit We will respond ASAP!

LED Mini Download Spec-Data Sheet Get a Quote These LED room information signs are extra low voltage (24V DC), low energy, low profile signs. Compact Low Voltage Signs ​ Being relatively compact, they can be mounted between the door handle and eye height which ensures that they will be seen by someone intending to enter the door. ​ Sign messages available: ​ Room In Use (LEDS-RIU-1WY & LEDS-RIU-2W) Laser Warning (LEDS-L-1WY & LEDS-L-2W) Laboratory In Use (LEDS-LIU-1WY & LEDS-LIU-2W) Occupied (LEDS-OC-1WY & LEDS-OC-2W) X-Ray (LEDS-XR-1WY & LEDS-XR-2W) Do Not Enter (LEDS-DNE-1WY & LEDS-DNE-2W) No Entry (LEDS-NE-1WY) Two State or Three State LED Signs All room information signs are available as two state signs and some are available as a three state sign. Two state signs are either off, displaying a black screen with no message, or on, displaying the message in yellow. Three state signs can be off, displaying a black screen with no message, on-state A, displaying a message in green, or on-state B, displaying a different message in red. Low Energy LED Signs Utilizing the latest LED technology, these signs are ultra low energy with a power consumption of only 3.6W. ​ Secret Sign When off, there is no visible message. For three state signs the red and green messages display in the same part of the sign at different times. ​ Maintenance Free With a lifetime in excess of 50,000 operational hours these signs are effectively maintenance free hence eliminating maintenance costs and risks. ​ Health & Safety Advantages Low voltage LED signs are inherently safer as there is not the necessity of connecting them to mains electricity. The mounting position at around chest height eliminates the need to have ladders in doorways for installation and maintenance purposes. ​ Power Supply with Switch For signs that are to be hand switched (rather than automatically switched) a power supply with 2 or 3 way switch is available. This wall or desk mountable unit has a clear visual indication of the sign state, including an LED at the end of the switch toggle which lights up the color of the sign. The power supply can operate up to two compact LED signs. ​ Custom Wording We are also able to do signs with custom wording and symbols to meet your requirements. Please contact our Sales Department for information. ​ Specifications Dimensions: 6.3″ (160 mm wide) x 4.3″ (108 mm high) x 1.5″ (38.5 mm deep) Weight: 1/2 pound (160g) Voltage: 24 VDC Power Consumption: 150mA at 24VDC (3.6W) ​ ​ Please contact us with any questions or if you require a quote. We look forward to working with you! Contact Us

About RT Technologies Inc. provides an extensive range of Laser Safety Products and Services for the Industrial, Medical, Research and Commercial Laser Users. Our company’s primary mission is to provide our customers with extremely responsive, ‘state of the art’ solutions to their laser safety needs. We do so by: ​ Providing custom laser consultancy for all industrial laser application needs and requirements; Providing Certified Laser Safety Officer (CLSO) services to support US FDA, CFR, and IEC compliance. Rich Palatine, President Products Laser Blinds Laser Curtains Slatted Vision Panels Laser Screens Laser Filter Windows Custom Enclosures (acoustic, laser, cutting, welding, etc.) Laser Interlock Systems LED Signs Slim Jim LED signs Mini LED signs Ultra LED signs Weatherproof Ultra LED signs Illuminated Warning Signs Laser Shutters Optical Table Guarding Laser Safety Eyewear Contact To learn more about how RT Technologies can help you and your business take advantage of the products and services we offer, call us today at 770-332-0092 , or email us at contact@rtlasersafety.com

Remote Laser Safety Officer (LSO) Training Get a Quote RT Technologies offers remote Laser Safety Officer (LSO) Training. Remote Laser Safety Officer Course (distanced learning: instructor does not have to come to the site) Course Instructor: Tom Lieb CLSO RT Technologies Laser Safety Officer Chair IEC TC 76 Optical Radiation Safety & Laser Equipment (IEC EN 60825) Convener ISO/IEC/EN 11553 Safety of Machines, Laser Processing Machines Secretary, IEC/TC 76 WG 7- High Powered Lasers (IEC 60825-4: Safety of laser products – Part 4: Laser guards) ​ ​ Course Topics ​ Review of laser technology & laser safety overview effects on the eye and skin LSO duties and responsibilities Nominal Hazard Zones (NHZ) Details of laser hazard classes (Wavelength time corrections, AEL values) MPE’s (tabular & calculated examples) Laser eyewear selection Laser control measures discussion Associated hazards Course Performance Objectives ​ Following the completion of this course, the students will demonstrate the ability to: ​ Discuss the fundamental concepts of laser science, biophysics, and tissue effects of lasers in current manufacturing use Identify the components of commonly used laser systems, delivery devices, and accessory instrumentation. Determine hazards associated with laser systems, by means of Standards compliance and risk assessment. Discuss administrative, engineering, and procedural control measures required of individuals working with lasers, the responsibility of the employer and the role of LSO’s and a Laser Safety Management Program Understand the impact and implementation of safety standards, in practical terms, in an active manufacturing environment. Course Details ​ Two Days Training for up to ten students Course includes lectures, discussions, and topics relevant to your laser safety program ​ ​ Facility Technology Requirements ​ The following is to be provided by the customer/students: ​ High Speed wireless internet connection suitable to accessing audio/video (Zoom, WebEx, MS Teams etc.) ​ Note: No video or audio taping is permitted ​ See Review Sample Outlines of other Laser Safety Training Classes as administered by RT Technologies Certified Laser Safety Officers (CLSO). Course Description ​ The two day Laser Safety Officer course contains the following elements: An Explanation of LSO duties and requirements (referencing ANSI Z136.1, OSHA, FDA-CDRH and State standards); A review of basic laser operation, and biological effects ; A review of the controls of laser hazards; non-beam hazards associated with laser use (i.e. fumes, shock, plume, etc.) emphasis on industrial hygiene based or engineering control solutions. Per client request, we will place emphasis on performance of audits and calculating OD for eyewear (examples at 193 nm pulsed, 213 nm pulsed, 325 nm CW, 488 nm CW, 633 nm CW, and 830 nm CW). The course concludes with an exam featuring working knowledge of MPE, AEL, NHZ and OD factors, etc. Contact Us Contact Us

12V Laser Beam Shutters Download Brochure Get a Quote The LS- range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as the ICS-9 laser interlock control system , for use as a means of shutting down the laser beam automatically during unauthorized access, or manually when the beam is not required. They can also be used as stand-alone shutters for manual or remote switching of the beam. These shutters are available as OEM components for laser or laser product manufacturers. Laser Beam Shutter Features: ​ Gravity fed for fail safe operation Combined shutter and beam dump for added safety High quality engineering design Specially designed for compatibility with safety control systems LED shutter status indication (output available for remote indication) Interlocked safety shutdown or manual operation Safety latch prevents accidental beam switch on Remote switching option Low current requirement Also available as OEM product ​ ​ ​ When used with the ICS-9 interlock control system, the LS series of shutters are used as shown on the right. Opening of any laboratory door without use of the override will result in the shutter closing, thus preventing unprotected persons from being exposed to the laser radiation. The shutter is fail safe and gravity fed. Loss of power will cause the shutter to close without reliance on springs or any other device. High quality engineering design ensures smooth and reliable operation. Contact Us LS 10-12 and 100-12 Shutter Specifications ​ ​ ​ Operating Voltage All shutters work from 12 VDC (11 – 14 VDC). However, if your supply is 18, 24 VDC or similar, request the LS voltage converter (part no.LS-VC-24.12) which enables operation from 15 – 35 VDC. ​ Operating Logic The shutters will not open unless power is supplied. When power is supplied a yellow LED lights to indicate that power is present. A green LED will also light indicating that the shutter is fully closed. To open the shutter, the green button must be pressed. The green LED will go out and an orange LED will light indicating that the shutter is fully open. The shutter can be closed by pressing the red button or by cutting the power. ​ Contact Us

Our Mission at RT Technologies: Thank you for your interest in RT Technologies Inc.’s Products and Services. Since our company’s inception in 2006, we have strived to provide the North American Laser User Community with the most technologically advanced and reliable laser safety solutions. Our customer base spans the Industrial, Medical, Defense, and National Lab/Government markets. Our goal with every customer contact or interface is to create the optimal blend of customer service and technical solution experience. We are able to provide our customers with an unmatched portfolio of laser safety products and industrial safety products. As the exclusive distributor and supplier of the Lasermet products in North America, RT Technologies can provide the answer or solution to your work place laser safety challenge ---no matter how big or small. ​ RT Technologies Inc. leverages expertise in the North American Laser Safety Regulation and Compliance arena to offer affordable, customized laser enclosures for all laser applications. By combining our extensive experience in Enclosure Mechanical Design with Laser Safety Officer Oversight, we can offer turn-key, FDA/CDRH certified light-tight laser enclosures within aggressive budget and delivery requirements. ​ This product catalog is a summary overview of the products and services offered by RT Technologies, Inc. A summary of each of the products is listed in the catalog. Further detailed information can be obtained by scanning the QR code alongside each product which will take you to the respective product’s webpage. We would be glad to provide further detail on any of the products/services listed in this publication and help you find the correct solution to your workplace needs/challenges. I urge you to contact us either by visiting our website at www.rtlasersafety.com or by calling us at (770) 332-0092. ​ Thank you again for your interest in our company and its products and services; we look forward to serving you in the near future. ​ Sincerely, ​ Rich Palatine President RT Technologies Inc. Laser Blocking Products Enclosures Laser Interlock System Radiation Shielding Information and Warning Signs Laser Safety Products Laser Safety Services Personal Protective Equipment LASER BLOCKING PRODUCTS Laser Blocking Produts Laser Blocking Curtains Laser Blocking Curtains provide world class laser blocking capability while being extremely light weight, flexible and easy to clean. ​ Features: Custom Designed based on customer dimensions Capable of interfacing with Laser Interlock Systems Manufactured with grommets for easy installation on a curtain track. Velcro, Turn Buttons, and Magnets are available to secure the curtain to a wall or window Also operates as a blackout screen Tested in accordance with NFPA 701-2015 Test Method 1 Silicone-based, fire-retardant base fabric; laser-blocking side: white; other side: black; 0.9 mm thickness CE marked and certified to EN 60825-4 Laser Blocking Blinds Laser Blocking Blinds eliminate the possibility of laser beams passing around the sides of the blinds and blocks out all light. Laser Blocking Window Blinds are used in educational settings such as laboratories; medical settings, such as operating rooms); and manufacturing facilities. ​ Custom Designed based on customer dimension Silicone-based, fire-retardant base fabric; laser-blocking side: white; other side: black; 0.9 mm thickness Easy to wipe down, low flammability Chain, crank, or motorized versions are available Class 3B and Class 4 Protection Available with pull-chain or crank handle Motorized versions are available with wireless remote, or dry contact connection Laser Blocking Slatted Vision Panel The Laser Blocking Slatted Vision Panels are ideal for use in operating rooms and are effective in blocking all medical lasers of all wavelengths. ​ A simple lever operates the slats within the window to either allow or block laser light from penetrating Standard and flush-fit units available System uses toughened glass in front of the slatted blind to prevent the ingress of dust and infection Optical Table Laser Guarding System The Optical Table Laser Guarding System (Optoblok) is designed specifically to reduce the risk of stray laser beams being inadvertently directed at personnel in the laser optics laboratory. ​ Fits neatly onto optical tables to provide an 11.8 “ high wall Easily constructed Compatible with both metric and imperial optical tables Laser Filter Windows Laser Filter Windows provide the capability to see through the window while providing filter protection from the laser radiation ​ Cost effective Available in large sizes Lightweight ENCLOSURES Enclosures Laser Safe Class 1 Room Enclosures RT Technologies, Inc. designs, supplies and installs Class 1 Laser Product and Laser Control Area (LCA) enclosures for high power lasers. ​ Key Features of the RT Technologies Inc.’s Laser Enclosures Modular & Customizable Design Lightweight & Strong Customizable Door Designs to maximize process Project management to ensure on time delivery and budget adherence. Process includes: Consultative Design Meetings with Customer Team Complete Engineering Drawing Sets (Prototyping and Final Design) Laser Safety Compliance Guarantee (FDA/CDRH ) Rapid Build Times Standard and Custom Colors Available Turn-key Delivery Support/Install support as needed Customized Small / Table-Top Enclosures Custom Small Laser Enclosure Projects are designed and managed by our team of laser safety experts; each project is managed by a Certified Laser Safety Officer (CLSO); each custom laser enclosure is manufactured by our team of production professionals. All laser enclosure projects are routinely reviewed with customers at key milestones. ​ Key Features of the RT Technologies Inc.’s Laser Enclosures Laser Cutting, Welding, Marking and Experimental applications Portable designs FDA/CDRH Certified; ANSI/OSHA Compliance Compatible with third party optical table designs Onsite set-up and training available LASER INTERLOCK SYSTEMS Laser Interlok System ICS-9 Laser Interlock System NRTL Certified The ICS-9 is a compact, versatile unit used to control laser interlocks, door locks, illuminated warning signs and other equipment. The ICS-9 provides a high level of safety and has start-to-end dual channel architecture and fault detection to meet the latest standards. Optional network card interface is available for local area network requirements. ​ Easy to install, operate and maintain Able to operate laser interlocks, laser power, beam shutters and warning signs Connect to virtually unlimited number of door contacts and emergency stops ICS Buddy Portable Interlock Controller The ICS-9 can communicate directly with the ICS Buddy. The ICS Buddy is a portable Interlock Monitor and Controller that can be used to remotely view and control the status of laser interlock controllers and laser shutters in a lab. ​ Provides portable control. Ability to walk around with the tablet from office to other locations. Remotely view and control laser shutters using your local Wi-Fi signal See the status of the whole lab remotely in Lab View. Ideal for numerous interlocks, shutters, and LED warning signs. ICS Buddy is a secondary interlock controller that duplicates the main controller Mirrors the main interlock controller located at the area in use. Interlock Accessories Accessories include Push Buttons, LED Signs, Keypads, Distribution Boxes, Maglocks, Shutters, Emergency Door Releases, E-STOPS, and Door/Barrier Interlock Switches. Laser Control Distribution Box (LCDB) For use with Lasermet Systems The Laser Control Distribution Box (LCDB) allows for quick connect/disconnect and control of multiple shutters or lasers using the Lasermet ICS-5, ICS-6, or ICS-9 interlock laser control system. ​ The LCDB expands the capability of each interlock operator output to connect multiple shutters or interlocks to a single interlock operator on the Lasermet system. Quick disconnect interface allows for rapid deployment and setup Dimensions: 2.72 x 4.48 x 1.39 inches (without pluggable terminals) Maximum Input Voltage: 160V LS-10-12 and LS-100-12 Beam Shutters The LS range of laser beam shutters are combined shutters and beam dumps designed to be driven by a safety control system such as the ICS-6 or ICS-9 Interlock control system. They can also be used as stand-alone shutters for manual or remote switching of the beam. ​ 10W (LS-10-12) and 100W (LS-100-12) options 12V DC operating voltage Remote switching option available LS-20-24 High Integrity Beam Shutters LS-20-24 High Integrity Beam Shutters The LS-20-24 Laser Safety Shutter is intended to provide a means of preventing accidental exposure to a potentially harmful laser beam. This unit has been designed to form part of a high-integrity safety system, featuring a gravity-close blade and force-disconnect contacts. ​ 20W rating; 24V DC operating voltage Standard front silvered or dielectric mirrors can be factory fitted to the blade if required 0.6 inch diameter entry and exit apertures A remote switching station is available LS-200 Laser Shutter LS-200 Laser Shutter The LS-200 Laser Safety Shutter is designed to prevent accidental exposure to potentially harmful laser beams. The shutter uses a gravity close blade and force-disconnect proving contacts and is designed to form part of a high-integrity safety system. ​ Blade Options: Stainless Steel, Copper, Ceramic, and Glass Optional Beam Dumps: Air cooled or water cooled SIL3 dual version is also available 200W rating; 24V DC operating voltage RADIATION SHIELDING Radiation Shielding Demron ALARA™ Shield Blanket The Demron™ ALARA Shield blanket is a contemporary shielding solution for gamma and X-Ray radiation. Utilizing a patented material that is comprised of heavy metals and polymers, the ALARA shielding material allows for an industrial radiation shielding solution that is lighter in weight than lead and is Non-Toxic. Therefore, when the Demron material becomes contaminated with residual radioactive contamination it is NOT A MIXED HAZARDOUS Material such as traditional lead. ​ Customizable size and thickness solutions; can develop specific solution for given application Industry standard Herculite protective outer layer Specific molecular engineering of material provides attenuation to gamma and X ray radiation and maximum heat dissipation Material available in three thicknesses​​ ​ ​ ALARA: 1.4 pounds per square foot ALARA PLUS: 3.7 pounds per square foot ALARA MAX: 5.0 pounds per square foot INDUSTRY TEST RESULTS Nuclear Power Plant Mix Attenuation Data Cs-137 (662 kev) Direct Beam Attenuation Data Blanket Use Cases Pipe/component shielding Outage/Reactor Head/Cavity shielding Tool/Component shielding Rad Monitoring or Contamination/Portal Monitoring shielding Shadow or Large Area shielding Rad Waste/HIC Container shielding Glovebox/sampling skid shielding INFORMATION & WARNING SIGNS Informaton & Warning Signs Mini LED Signs (LEDS-XXX) These LED room information signs are extra low voltage (24V DC), low energy, low profile signs. ​ Dimensions: 6.3” (w) x 4.3” (h) x 1.5” (d) Custom wording & symbols to fit your requirements Use as a stand-alone unit or integrate it with the ICS Interlock System Compact, contemporary appearance Lifetime in excess of 50,000 operational hours Ultra LED Signs (LEDS-ULT-XXX) With a thickness of only one inch, these signs are the ultimate in slim-line design and can be wall mounted at any height without causing any form of obstruction or hazard. ​ Standard Size Dimensions: 18.5” (w) x 7” (h) x 1” (d) Large Size Dimensions: 31.1” (w) x 7” (h) x 1” (d) Custom wording & symbols to fit your requirements Available in either standard (18.5” long) or large (31.1” long) sizes. Lifetime in excess of 50,000 operational hours One sign can produce, in any color, a single message, or two different messages in red and green Slim Jim LED Signs (LEDS-SJ-110-XXX) Slim Jim LED Signs (LEDS-SJ-110-XXX) These LED room information signs operate on standard 110V AC; these signs are a low energy LED, low profile design. ​ Dimensions: 14” (w) x 4” (h) x 0.4” (d) Custom wording & symbols to fit your requirements Use as a stand-alone door sign or integrate it with the ICS Interlock System Compact, contemporary appearance IP66 Weatherproof Ultra LED Sign The Ultra 580 IP66 is an LED sign designed for outside use. It is IP66 rated to BS60529 which means that the sign is protected against powerful water jets and is dust-tight - ideal for use in the wind and rain. ​ Dimensions: 23” (w) x 7” (h) x 1” (d) 24VDC low voltage, low power consumption One sign can produce, in any color, a single message, or two different messages in red and green Audio Alert (AA-04, AA-04-PIR) The Audio Alert system is a local public address system that audibly delivers a pre-programmed message when triggered. ​ Can be used in conjunction with LED Signs for optimal audio and video notifications Adjustable message repetition and frequency Adjustable volume Line-out to external audio equipment Playback triggered on power up or PIR motion detection Safe low voltage 24VDC Illuminated Laser Warning Signs Illuminated Laser Warning Signs are 2.7” deep and come in single, double or triple aspect varieties. These signs are manufactured in high quality steel with a cream colored powder coat finish and acrylic front panel. Single Aspect Laser Warning Sign (1-WAY-SIGN-LP) Dimensions: 14.2” (w) x 6” (h) x 2.7” (d) Double Aspect Laser Warning Sign (2-WAY-SIGN-LP) Dimensions: 14.2” (w) x 11.8” (h) x 2.7” (d) Triple Aspect Laser Warning Sign (3-WAY-SIGN-LP) Dimensions: 14.2” (w) x 6” (h) x 2.7” (d) LASER SAFETY PRODUCTS Laser Safety Products Laser Safety Eyewear RT Technologies Inc. offers a wide variety of laser goggle and laser protective eyewear. All eyewear conform with International Standards and Directives. Eyewear for Dental and Dermatology Applications RT Technologies offers laser safety eyewear for dental and Dermatology applications. Protect your staff and your patients with the proper eye protection. Material : Polycarbonate Color : Pink VLT : 65% Acrylic Warning Signs/Placard Acrylic Warning Signs are commonly used in medical and/or cosmetic laser industry applications. They can be fitted to a door using double sided tape, screws, or it can be hung up and turned around as required. Acrylic sign for IPL and Laser Clinics Size: 8.8”(w) x 11.7”(h) Weight: 4.4 oz. Large Shatterproof Warning Notice Size: 13.8” (w) x 9.8” (h) x 0.1” (d) LASER SAFETY SERVICES Laser Safety Servies Custom Laser Enclosure Consulting RT Technologies, Inc. designs, supplies and installs Class 1 Laser Product and Laser Control Area (LCA) enclosures for high power lasers. ​ Turn-key Project Management Complete FDA/CDRH Certification Supplied Onsite Assembly of laser enclosures (if required) Laser Product Consultation & Registration RT Technologies Inc. provides complete, turn-key laser product certification/registration, product testing and laser safety program auditing services. ​ Registration of Laser Products with the FDA Laser Product Safety/Prototype Testing Laser Safety Program Assessment and Regulatory Compliance Audit Laser Safety Training RT Technologies Inc. supplies customized Laser Safety Training Courses. Whether you need to train the casual user or create a formal Laser Safety Program, we can create a training course for you. In addition to our classroom training, we now offer Computer Based Training (CBT). Our lesson plan material is designed by Certified Laser Safety Officers (CSLO’s) following detailed consultation with our customers. Laser Safety Program Audits The Laser Safety Program Audits typically includes the following: CLSO developed audit scope in conjunction with customer needs and required programmatic area for review Onsite CLSO visit to review and collect data Final report, complete with recommended corrective actions typically issued within 2 to 3 weeks of project commencement PERSONAL PROTECTIVE EQUIPMENT Personal Proective Equipmnt AlphaProTech N95 Masks The Positive Facial Lock® (PFL®) N-95 Particulate Respirator meets the World Health Organization (WHO) and the Centers for Disease Control (CDC) recommended protection levels (where applicable) for many airborne contaminants. NIOSH Approved, our N-95 delivers the appropriate amount of filtration efficiency and when combined with a trio of patented and unique design features, also delivers the user a comfortable, custom fitting facemask. ​ The integrated Magic Arch® technology creates a breathing chamber within the facemask by holding it away from the user's nose and mouth. Our PFL technology, incorporating an integrated Twist Seal® chin piece, helps the wearer create a perfect fit every time. ASTM F2100 Compliant Level 3 mask Manufactured in the USA . Guardian NC4™ Nitrile Examination Gloves The Guardian NC4™ powder-free, nitrile gloves offer consistent, dependable protection without sacrificing comfort or durability. These 4 mil, finger textured gloves have enhanced grip and tactile sensitivity, making them the perfect choice for workers in healthcare, sciences, industrial applications and food preparation. The Guardian NC4™ gloves have been tested for chemotherapy & cytotoxic drugs, and comply with US FDA food contact regulations. ​ PRODUCT SPECIFICATIONS ACCELERATOR-FREE NITRILE POWDER-FREE BEADED CUFF COLOR: SKY BLUE CONFORMS TO ASTM D6319 TESTED FOR USE WITH CHEMOTHERAPY DRUGS PER ASTM D6978 21CFR820 FDA 510(K) MANUFACTURED IN MALAYSIA TO ISO 13485:2016 & ISO 9001 QUALITY STANDARDS

Laser Blocking Portable Panels Download Brochure Get a Quote Foldable laser safety panels have 360 degree hinges that allow you to move and position our barrier according to your needs. It’s easy to store and takes up less space than most barrier systems. Choose from one of our standard products, or design a barrier system specific to your laser application. ​ All foldable panels are made with materials that have a laser safety rating of 2,500 W/cm2 for 100 seconds. Made to withstand direct and diffusely scattered laser light generated by Class 3B or 4 lasers as specified with ANSI : Z 136.1-Section 4.4.2.5. Contact us for details. Foldable 2-Panel System ​ Size: 8′ 3″ x 6′ 11″ Foldable, for ease of storage Light weight and wheeled, for maximum mobility Unique, 360˚ light-tight hinge technology Heavy-duty extruded aluminum frame Certified laser safety barrier panels ​ Available in 2, 3, 4, 5, and 6 panel systems. Ships assembled. ​ Foldable 3-Panel System ​ Size: 12′ 4″ x 6′ 11″ Foldable, for ease of storage Light weight and wheeled, for maximum mobility Unique, 360˚ light-tight hinge technology Heavy-duty extruded aluminum frame Certified laser safety barrier panels ​ Available in 2, 3, 4, 5, and 6 panel systems. Ships assembled. ​ Get a Quote Foldable 4-Panel System ​ Size: 16′ 5″ x 6′ 11″ Foldable, for ease of storage Light weight and wheeled, for maximum mobility Unique, 360˚ light-tight hinge technology Heavy-duty extruded aluminum frame Certified laser safety barrier panels ​ Available in 2, 3, 4, 5, and 6 panel systems. Ships assembled. ​ Foldable 5-Panel System ​ Size: 20′ 6″ x 6′ 11″ Foldable, for ease of storage Light weight and wheeled, for maximum mobility Unique, 360˚ light-tight hinge technology Heavy-duty extruded aluminum frame Certified laser safety barrier panels ​ Available in 2, 3, 4, 5, and 6 panel systems. Ships assembled. ​ Get a Quote Foldable 6-Panel System ​ Size: 24′ 7″ x 6′ 11″ Foldable, for ease of storage Light weight and wheeled, for maximum mobility Unique, 360˚ light-tight hinge technology Heavy-duty extruded aluminum frame Certified laser safety barrier panels ​ Available in 2, 3, 4, 5, and 6 panel systems. Ships assembled. ​ Contact Us